Marvel 25iM Guia de Resolução de Problemas descarregar pdf (Página 5)

INSTALLING THE WATER SUPPLY

Figure 3

Back view of

ice machine

Water supply

inlet

Water Supply

Observe and follow all local building codes when install-

ing this appliance.

Attach the supplied water line adapter (Figure 4) to the

water valve inlet on the back of the ice machine (See

Figure 3). Be sure the rubber washer is in place in the

inlet valve nut. Bend the 1/4” copper tubing to suit your

installation being sure not to kink the tubing. Use 1/4”

copper tubing for your water supply which is available at

any local hardware or plumbing supply store. Connect

the copper tubing water supply to the copper tubing from

the adapter assembly with the provided brass union.

Water pressure must be at a minimum of 20 psi for

proper operation.

Make certain all water connections are watertight after

installation. Form the tubing so that it will not vibrate

against the cabinet body or kink when your ice machine

is set in position.

Rubber washer

Inlet valve nut

1/4” copper tubing

Figure 4

1 2 3 4 5 6 7 8 9 10 ... 19 20

Sem comentários

Marvel 25iM Guia de Resolução de Problemas Página 5